Medūzos rezervuaro lemputė LED spalvota akvariumo naktiniai šviestuvai prie naktinės stalinės lempos vaikiškos lempos dekoratyvinės lempos

Specification: Material: ABS+organic silicon+silicone electronic parts Color：as shown Size: 18x10x23cm Packing box size: 21.5x13.2x26.1cm Rated power: <1.2W Rated voltage: 3 x AA 1.5V or transformer (output DC4.5V, 500mA) Power supply mode: USB and battery are both available Battery: 3 x AA battery (without battery) packing list： 1 x plastic fish tank 3 x silicone jellyfish 1 x USB cable 1 x English manual Features 1. Desktop aquarium light: the soft LED light can relax your mind, and the color of the LED can be changed according to your mood 2. LED lights and five kinds of color-changing lighting systems: to illuminate the color-changing environment lighting box, the color-changing lights add atmosphere to your room, and watch the sea in life swim freely 3. Simulated ocean background: the background image is paper, and the pattern is sent randomly. 4. Power saving and easy to use: automatically cut off the power after 4 hours of operation, quiet operation, so no harmful background noise will be generated, by 3 AA batteries or optional USB data cable (batteries not included) 5. Very good application: bedroom, home, bar, cafe, restaurant, wedding, party. They are also the best lighting tools at night. Make your night full of brilliance. STEP: 1.Add water, a few drops of dish washing liquid & jellyfish into the tank. Shake the tank gently then empty the bank. 2.Slowly fill the tank with water to the level indicated by the line on the tank, Distilled water is recommended.Sink the jellyfish gently then replace the hood. · Try to gently shake as many air bubbles off the jellyfish body and tentacles as possible. This will improve the performance and stop them floating at the top. 3.ON/OFF 1)Press the button to activate the lamp in "automatic light color changing" mode. 2)Press again to turn off. 4.SELECT: Press to select 5 light colors. Connect "A" end of adaptor to the product and plug "B" end into the wall socket. Note: 1. When the water drops below the lowest level, add water. 2. Change the water when it gets dirty, and operate the hood carefully to prevent water from splashing out. 3. In order to get the best performance and durability, it will automatically shut down after 4 hours of operation. 4. Wait 1 hour, then press the button to reactivate the device.