S925 Silver Cross With Pin DIY Versatile O-Chain Universal Necklace Bracelet Anklet Heart Chain New 1530

Usage: Pull the needle out of the small ball, then string the beads through it. When wearing, simply insert the needle back into the small ball and hang it around your neck. The principle of operation is to pull the chain when you can. 0k Do not pull by the needle! Note: Although this chain is convenient for threading beads or pendants with small holes, it also carries certain operational risks. Improper handling or side stress on the connection point between the chain and the pin may cause the pin to break. This is not a quality issue but requires caution when handling beads. After threading beads, try to use a clasp to remove the necklace or bracelet from your neck or wrist when opening it in the future. Another method is to remove the pin after operation and stick a half-hole bead onto the broken end. This method can also be used as a remedy for individual buyers who experience accidental pin breakage Quantity: 1 piece, Breakup Bracelet and Necklace, Anklet, Matching Set 925 Silver Cross Chain Platinum Plated, Yellow Gold Plated, Rose Gold Plated, Bracelet Thin Style: The chain thickness is 0.9 millimeters, with an approximate length of 18cm millimeters. It is recommended to drill a hole larger than 1 millimeter, otherwise it won't fit through. There is an adjustment ball at the end of the chain to adjust the length when worn Anklet Thin Style: Chain thickness 0.9 millimeters, length approximately 24cm millimeters. It is recommended to drill a hole larger than 1 millimeter, otherwise it won't fit through. There is an adjustment ball at the end of the chain to adjust the length when worn Necklace Thin Style: The necklace is 0.9 millimeters thick and approximately 45cm in length. It is recommended to drill a hole of at least 1 millimeter, otherwise it won't fit through. There is an adjustment ball at the end of the chain to adjust the length when worn Generally, the holes of pearls removed from pearl necklaces are relatively small and cannot be directly strung through; these holes must be custom-sized. The difference from the 20 yuan style is that the 20 yuan chain has welded ear pins, and the adjustment ball is 4mm in size. This chain has pins made of welded silver wire, and the adjustment ball is 3mm in size.